Hoses, Hose Manufacturer, S.S. Wire Braided Hose, S.S. Flexible Hose, Metallic Flexible Hose, S.S. Hose Manufacturer, S.S. Wire Braided hose, Metallic Flexible Hose India, S.S. Flexible Hose Assemblies, S.S. Flexible Hose Manufacturer, Bellow Hoses, Stainless Steel Hose, Corrugated Hose, Annular Hose, Stainless Steel Hoses, Corrugated Hoses, Hose Assemblies, S.S. Wire Braid, Hose Manufacturer India, Corrugated Flexible Hose, Annular Corrugated Flexible Hose, Metallic Corrugated Flexible Hose, Flexible Corrugated  hose, S.S. Wire Braided Flexible Hose
Home  |  E-mail  |  Download   ISO 9001 : 2000   GL Operating 24/7
 
Home Products Profile Contacts Feedback
Hoses, Hose Manufacturer, S.S. Wire Braided Hose, S.S. Flexible Hose, Metallic Flexible Hose, S.S. Hose Manufacturer, S.S. Wire Braided hose, Metallic Flexible Hose India, S.S. Flexible Hose Assemblies, S.S. Flexible Hose Manufacturer, Bellow Hoses, Stainless Steel Hose, Corrugated Hose, Annular Hose, Stainless Steel Hoses, Corrugated Hoses, Hose Assemblies, S.S. Wire Braid, Hose Manufacturer India, Corrugated Flexible Hose, Annular Corrugated Flexible Hose, Metallic Corrugated Flexible Hose, Flexible Corrugated  hose, S.S. Wire Braided Flexible Hose
Pressure Loss
 
 
 
3, Suflam Estate,
Nr. Avtar Hotel,
Isanpur Highway,
Isanpur, Ahmedabad
Gujarat, India.
 
info@hydroflexpipes.com
hydromat2000@yahoo.co.in
hydroflexpipe@gmail.com
 
   
Pressure Loss

The pressure loss in corrugated hoses is 100% higher than in new welded steel pipes, because the bore of a corrugated hoses is not smooth. This means that in the case of corrugated hoses an increase in diameter of 15% is required to reduce the pressure loss to the value of the pressure loss in steel pipes..

 

 

The chart shows the approximate pressure drop for each size of corrugated hoses related to a flow rate where water is the fluid. To utilize the chart, read off on the base line the flow rate required. Where vertical line from the selected point on the base line intersects the nominal bore line, the pressure drop is shown on the vertical axis, corresponding to the point inter section.

 
 
< Back   Next >